1) VALVE MANIFOLDS : ISOLATION VALVE NEEDLE TYPE
Hand operated valve for isolation of medium, with a variety of inlet & outlet connections.
TECHNICAL SPECIFICATIONS
| Specifications | Details |
| Material : | CS, SS 316, SS 304, Monel, Hastelloy C |
| Inlet | Outlet |
| 1/4 Inch NPT (F) : | 1/4 Inch NPT (F) |
| 3/8 Inch NPT (F) : | 3/8 Inch NPT (F) |
| 1/2 Inch NPT (F) : | 1/2 Inch NPT (F) |
2) VALVE MANIFOLDS : TWO WAY VALVE MANIFOLD
A Two way valve manifold combines facilities for isolation, calibration, test & venting of the instrument. This manifold is generally used with pressure gauges, transmitters, pressure switches & similar pressure measurement equipment. The manifold are available in number of configurations to suit every type of installation. A variety of mounting / support methods are possible.
TECHNICAL SPECIFICATIONS
| Specifications | Details |
| Material : | CS, SS 316, SS 304, Monel, Hastelloy C |
| Vertical Inlet, Outlet & Drain/Test Connection : | For line installation and suitable for wall mounting using 2 nos. of M8 bolts |
| Inlet | Outlet | Drain / Test |
| 1/2 Inch NPT (F) : | 1/2 Inch NPT (F) | 1/4 Inch NPT (F) |
Horizontal Inlet, Instrument Flanged Outlet & Drain/Test Connection
Suitable for direct mounting to gauge pressure transmitters. 1 No of P.T.F.E. ring, manifold to instrument sealing ring with 2 Nos. of 7/16 Inch UNF carbon steel bolts are included with the manifold. The drain valve bonnet is on left hand side. The manifold can be base mounted using locating pin & mounting bolt.
| Inlet | Outlet | Drain / Test |
| 1/2 Inch NPT (F) | Flanged (12.0 mm hole at 41.3 mm apart) |
1/4 Inch NPT (F) |
Vertical Inlet, Outlet & Drain/Test Connection for PT
Suitable for direct mounting to pressure transmitter.
| Inlet | Outlet | Drain / Test |
| 1/2 Inch NPT (F) | 1/2 Inch NPT (F) | 1/4 Inch NPT (F) |
3) VALVE MANIFOLDS-THREE WAY VALVE MANIFOLD
A three way valve manifold is used in conjunction with differential pressure transmitter. It provides two isolation, equalizing & drain/test functions. It allows to operate or to isolate, zero adjust the instrument & safely drain any trapped medium. The drain ports have dual functions. They can also be used as test or calibrations after the draining operation.
TECHNICAL SPECIFICATIONS
| Specifications | Details |
| Material : | CS, SS 316, SS 304, Monel, Hastelloy C |
A) Direct Mounting (T Type)
This manifold is suitable for direct mounting to differential pressure transmitter. The mounting holes are at 54.0 mm x 41.3 mm ( 2 1/8 Inch x 1 5/8 Inch ). The manifold is supplied with 2 Nos. of neoprene rubber ring for manifold to instrument sealing & 4 Nos. of 7/16 Inch UNF carbon steel bolts. An optional drain /test connection at instrument side is available.
| Inlet | Outlet |
| 1/4 Inch NPT (F) | Flanged |
Remote Mounting
This manifold is suitable for remote mounting from a differential pressure transmitter. The base mounting holes are suitable for 2 Nos. of M6 bolts. An optional drain/test connection at instrument side is available.
| Inlet | Outlet |
| 1/2 Inch NPT (F) | 1/2 Inch NPT (F) |
B) Direct Mounting (H Type)
The mounting holes are at 54.0 mm x 41.3 mm ( 21/8 Inch x 15/8 Inch ). Instrument side 12.0 mm hole & process side 7/16 Inch UNF threading provided for mounting integral orifice plate.
| Inlet | Outlet |
| Flanged | Flanged |
Direct Mounting with Drain/Test Connection for Smart DPT
This manifold is designed for direct mounting on differential pressure transmitter. The instrument outlet centers are at 54.0 mm. An optional outlet centers at 33.0 mm is also available.
| Inlet | Outlet | Drain / Test |
| 1/2 Inch NPT (F) | Flanged | 1/4 Inch NPT (F) |
4) VALVE MANIFOLDS : FIVE WAY VALVE MANIFOLD
Five way valve manifold is used in combination with differential pressure transmitter providing isolation, equalizing & drain/test functions. It allows the operator to isolate zero adjust the instrument & safely drain any trapped medium. The drain ports have dual functions. They can also be used as test or calibration connections after the draining operation
| Specifications | Details |
| Material : | CS, SS 316, SS 304, Monel, Hastelloy C |
Direct Mounting:
This manifold is suitable for direct mounting to a differential pressure transmitter which has outlet flanged connection centers at 54 x 41.3 mm. 2 Nos. of neoprene rubber manifold to instrument sealing rings & 4 nos. of 7/16 Inch UNF carbon steel bolts are supplied with the manifold.
| Inlet | Outlet | Drain / Test |
| 1/2 Inch NPT (F) | Flanged | 1/4 Inch NPT (F) |
Remote Mounting:
This manifold is suitable for remote mounting from differential pressure transmitter. The base mounting holes are suited to 2 nos. of M6 bolts.
| Inlet | Outlet | Drain / Test |
| 1/2 Inch NPT (F) | 1/2 Inch NPT (F) | 1/2 Inch NPT (F) |